Have to agree with Wokks, that green will look great with the burst and gold hardware.
With the burst, can I make a suggestion - take the green all the way to the edge of the body. That way, if you start spraying the burst and decide a narrower burst is what you want, there wont be any gaps where you need to fill in the green, like around the f-holes.
Here's a trick I used, get an offcut of timber and mark on it how far you want the burst to go into the body, for example 3cm, and as use it as a depth gauge to keep the burst even all the way around. Could wrap tape around a pencil or old ruler, whatever works.
Might be easier to manage with the body laying flat rather than hanging. Some make templates for the burst but I'd prefer to be able to see how it's working out as I go. Just my 2c worth. (hope that made sense)

Grant