Thanks for the comments everyone.

Previously I left off with the electronics cavity. Now I'll show you the steps I took before gluing on the body wings.

First, I had to cut off the excess on the neck. I positioned the body wings and drew the outline.


Then cut it out with my hand saw. I reckon it would be much easier getting as much done on the neck before gluing. Don't want to be manoeuvring a 34" scale bass around too much!


Then I also had to get rid of excess wood on the neck heel. I'm going for an all-access neck heel which would allow me to easily get up to the 24th fret despite it being a single cut. You may have seen the pictures from my previous posts and this is how I did it.