I have one of those semi hard cases for my Ovation acoustic. I was really unsure of how it would go, extremely limited choices for a bowl back, but it is great. Not as bulky or heavy as a hard case and it will take a fair bit of abuse.
I have one of those semi hard cases for my Ovation acoustic. I was really unsure of how it would go, extremely limited choices for a bowl back, but it is great. Not as bulky or heavy as a hard case and it will take a fair bit of abuse.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Hey Muzza, thanks for sharing these pictures. Can you tell me how flexible these cases are?
I found this one (https://on-stage.com/specsheets/GPCE5550.pdf) at Allans Music in Melbourne for only $56 which is the same brand as the one you have, but I'm not sure if the dimensions are the same.
According to the official measurements from On-Stage, the internal width is 32cm. I just measured the width of the LP body, and it measures 33cm. Would there be enough give in the walls to accommodate this, or is it too firm?
Thanks in advance.
Last edited by Zandit75; 13-07-2016 at 03:51 PM.
Acoustics:
1995 Maton EM725C - Solid 'A' Spruce Top, QLD Walnut B&S, AP5 Pickup
2015 Ibanez AEL108MD-NT - Laminated Spruce top, Laminated Mahogany B&S, Fishman Sonicore Pickup
Electrics:
Pitbull LP-1S - http://www.buildyourownguitar.com.au...ead.php?t=5745
Carsen Superstrat Rebuild - http://www.buildyourownguitar.com.au...ead.php?t=6284
Builds in Progress:
Silent Guitar Semi-Scratch Build - http://www.buildyourownguitar.com.au...ead.php?t=6809
similar semi hard case - $75 of the 'bay, posted from Australia
http://www.ebay.com.au/itm/Electric-...QAAOSw9N1VhDNN
![]()
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Hi Zandit. That's the same brand, but it's a different case. The 'pocket' on mine is significantly larger. The one you linked to looks like you'd be lucky to get a laptop in there. I just had a good look around the On-Stage website and can't find mine.
With the model I have, the pocket is attached to the side, not integral like that one.
The foam is pretty dense & rigid. In my opinion, I reckon it would actually offer better protection than the standard musicman case.
Sorry guys, all I can suggest is you contact the store I bought mine from;
http://www.mooloolabamusic.com.au
They'd sell you one, but postage would probably hurt.
Send the photo of mine to Allan's and ask if they can get a hold of one for you.
Good luck. It's worth the hassle. I'm thinking of getting more of them for my other guitars.
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956
Last edited by Muzza; 13-07-2016 at 06:56 PM.
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956
These are the modifications/improvements I'm considering on an already impressive case. The inner foam liner is screwed to an internal flap and looks like I'll be able to remove it and do a lot of my alterations from behind the 'plush' liner.
Red;
relocate the 'wall' from the storage well toward the lower bout. (yes, I'll have to modify the 'lid' to match)
Yellow;
remove some material from above both storage wells. It's about 2" thick and removing some will effectively double the depth of the well.
Blue;
with the foam I removed from the wells, I'll create some walls either side of the headstock. There's tons of room here too."
I just need to find some similar 'plush' (read 'cheap') black material from my local fabric shop to cover the alterations.
I'll keep you informed on my progress if I decide to go ahead.
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956
Once its loaded up with iPad, pedals, cables, stand, strap, etc... it's probably gonna be too heavy for the pathetic shoulder strap they include, so I'd suggest using stronger straps from other, better luggage.
I use the shoulder strap from my padded surfboard bag.
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956
Awesome response Muzzy, thank you very much!
I can't find your particular case anywhere either. I've sent off an email to your local shop to ask if they can check out the internal comfort for an LP style guitar. Unfortunately, as you said, with freight, I could buy two of the ones advertised at Allans music in Melbourne.
Thanks again,
Acoustics:
1995 Maton EM725C - Solid 'A' Spruce Top, QLD Walnut B&S, AP5 Pickup
2015 Ibanez AEL108MD-NT - Laminated Spruce top, Laminated Mahogany B&S, Fishman Sonicore Pickup
Electrics:
Pitbull LP-1S - http://www.buildyourownguitar.com.au...ead.php?t=5745
Carsen Superstrat Rebuild - http://www.buildyourownguitar.com.au...ead.php?t=6284
Builds in Progress:
Silent Guitar Semi-Scratch Build - http://www.buildyourownguitar.com.au...ead.php?t=6809
I guess it just depends on how important the larger side pocket is to you. For me, it's vital. I've got an old guitar shaped gig bag with a similar pocket on the one you linked to, and it's as good as useless. Takes an iPad and it's full. I'll be selling it with my Yamaha bass now that I've got my beloved Stingray5.
Again, I strongly suggest you email my photos to Allan's Music. They might be able to get a hold of one.
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956