ST-1 By nitroburner1000

[nitroburner1000]

Ohhh man that blue is money

Cheers bud.

[wokkaboy]

Looks great Nitro. Should look the goods with clear coats. Check the depths of the switch and pots if you are shielding the cavities

[nitroburner1000]

Looks great Nitro. Should look the goods with clear coats. Check the depths of the switch and pots if you are shielding the cavities

Cheers mate, yes i am shielding the cavities but the pots fit perfect, plenty of clearance, only thing that might touch is the bucker screws, but they can be shortened if need be.Yea id hate to short it out

[nitroburner1000]

Ok...... Metallic coats are dry and ive put 3 light coats of clear on. It still needs to be fine sanded then 2 more coats of clear then waiting for it to dry before i cut and polish it.
These pics taken inside show the true colour.
Its hard to take a proper picture of the colour because it changes from blue to green-blue, but these are pretty close



These pics taken in the garage show the blue.

[nitroburner1000]

Hers a quick video to show you the blue changing to the green colour and how it goes dark when not on direct light

[Andy40]

Lookin pretty good there Nitro, I can't tell but thats before there's been any polishing?

[FrankenWashie]

That's gorgeous!

[nitroburner1000]

Lookin pretty good there Nitro, I can't tell but thats before there's been any polishing?

Thanks, Yes, that is only 2 coats of clear, a sand then 2 more coats then a polish.

[nitroburner1000]

That's gorgeous!

Thanks franken, im wrapped

[andrewdosborne]

That's looking really nice, is it acrylic based finish?