Originally Posted by wokkaboy
Yep, I've just been doing some tracing out of the wiring so I can work out where the broken wires go, I need to remove some heatshrink insulation from one of the switches so I can work out how the middle Pup is wired-up, the jack is mounted on the edge of the body like a Telecaster, here's a pic of the jack so you can see what it looks like:
It's a 1980 and the humbucker (a Bill Lawrence from the look of it) has been modded in. Deadset rad guitar.
Last edited by pablopepper; 30-06-2016 at 02:00 PM.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Cheers mate, hopefully the guitar should sound great once it's all up and running, I'm guessing that the neck is a Fender Scale 25.5 inch type, therefore Fender Strat setup specs should work fine.
On the underside of the Humbucker there's a little sticker with some handwriting on it that reads "L500L", so I'm assuming that the Humbucking pickup is probably a Bill Lawrence L500L.
yeah cool Doc what a cool project !
good on you Pabs (WAE - walking axe encyclopedia haha) to the rescue again !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah, I agree, it's not very often that you get to work on one of these, you should see some of the other guitars my mate has, the last time I was at his place he got me to install a new mini CTS pot in his Suzuki LP guitar, he was really happy to get it working again.
This is probably what it looked like originally...
http://www.guitar-museum.com/guitar-...300NT-amp-CASE
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
@ Pabs that does have some similarities
@ Doc just measure nut to 12th fret should be about 323/324mm if a F type scale
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
What it looks like is that my mate either got someone to make a new scratchplate for his Blazer, or, he bought it online and had it modded to accept the Humbucking pickup.
Posting Permissions
Reply With Quote
