Results 1 to 10 of 41

Thread: TL-1TB Build

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #10
    I used an after-market roller bridge on mine (which has a fractionally lower profile than the stock bridge), but as the others have said you do need a neck break angle for the TOM bridge on this model. I use fishing line when testing as it's a little easier to manage when you're tweaking things. Don't alter your neck angle unless you are absolutely certain it is necessary. On mine a 2 degree angle in the pocket was about perfect for the roller bridge, allowing a nice string clearance at a low bridge setting.







    (no Wokks, it's still not finished)
    Last edited by WeirdBits; 07-06-2016 at 03:20 PM.
    Scott.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •