Start on the neck, Tassie Blackwood with quilted NSW Blackbutt headstock.
Start on the neck, Tassie Blackwood with quilted NSW Blackbutt headstock.
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
As I have said DB you should do a kit of this in bass and guitar. Love it
Are you puttin' f holes in it?
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956
Click on the pic above Muzza you can see DBs drawn f holes on surface.
Looking sweet DB.Better lock this build down from nappers!
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Neck fitted and F holes started...
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
looks off the chain DB loving this build more and more as it progresses. One of your best builds so far I mc-reckon !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Me too Wokks, I like this shape more and more every time I look at it. It's looking great DB.
Scott.
The body shape still has the 'essence' of the BB1200. Subtle, noice.
I was worried at first, but it's coming along nicely.
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956
Cheers Muzza.
The tweaks I made to the lower horn were done so I could get my Gorilla hand to the high notes..
Also shaved a bit off the lower bout to balance the shape a bit. Although I love the BB I always felt the body was a tad bum heavy
It will remain to be seen if the multiscale thing will work with this beastie, but I am confident it will work.
I dont think I have enjoyed a build as much as this one for a long time!
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
Posting Permissions
Reply With Quote
