Here we go, here are the pics I was taking with my digital camera while doing all the wiring up:
As in the previous pedal build, the first thing I did was to mark out the positions of the mounting holes in the aluminum case and drill them to the correct size:
Next thing was to do a test fit of all the parts that mount on the aluminum case:
This should give you a bit of an idea what the pedal is going to look like when finished, I decided to lay out the controls in a Triangle shape like the original Big Muff:
Next thing to do was to wire up all the ground connections prior to doing the control wiring and installing the circuit board:
At this point all the control wiring, and all the in/out wiring, etc has been done:
Reply With Quote