Results 1 to 10 of 23

Thread: New JB 5 String Bass - Fretted or Fretless, Maple or Rosewood Fretboard

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 30-05-2016, 10:51 AM #11
    wokkaboy
    wokkaboy is offline
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    great looking kit Ads and some nice options with the four different options.
    Hard to see the photo of the bridge whether the holes are reflections but looks like there are no string holes on the back plate. Assuming its not a string through bridge and the 6 holes are for mounting.
    Also I would double check the neck measurements
    Neck specs: 42mm@nut, 55mm@5th fret, 65mm@12th fret and 72mm@20th fret

    55mm at 5th fret seems too bigger jump ->13mm wider than the nut.
    Although it may be correct
    Last edited by wokkaboy; 30-05-2016 at 10:55 AM.
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules