Guitar Input jack Hole

[wokkaboy]

Hi Mindis, a bit hard to see in your photos so I've looked at the photos on the PBG site.
So the jack hole goes nowhere no hole at the bottom for wires to the volume pot cavity ?

If there is no hole for wires jack hole to the volume cavity you will have to find a long drill bit, about 4mm diameter will be enough for hot and earth wires from the jack. Make sure you align the angle of the drill bit so it will come out to the volume pot cavity.
Check the other wire holes the switch is near the front bottom bout, there should be a hole switch to neck pup cavity, then a hole between neck and bridge pup cavity,then a hole to the volume pot cavity.
Please check all the other wire holes are there.
Also you will need to run the earth wire from the tremelo spring claw probably back to the volume pot.
All the other holes I have described appear to be drilled on the PBG site pics