Results 1 to 5 of 5

Thread: Explore

  1. #1
    Member Sheven's Avatar
    Join Date
    Apr 2016
    Location
    South Strya
    Posts
    47

    Explore

    Hello my friend is after a Explore.. but he can't find any wiring diagrams.. It is also a 5 string as well
    Cheers
    Sheven..

  2. #2
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hi Sheven, being 5 string I presume its the EX-5 kit ?

    http://www.pitbullguitars.com/shop/g...ss-guitar-kit/
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  3. #3
    Member Sheven's Avatar
    Join Date
    Apr 2016
    Location
    South Strya
    Posts
    47
    Yes it is but he can't find a disgram

  4. #4
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    Hi Sheven, the YB-4 diagram will work, just presume there are 2 humbuckers.
    The EX-5 kit has 2 volumes and one tone so this will work

    http://www.pitbullguitars.com/wp-con...f/PBG-YB-4.pdf
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #5
    GAStronomist wazkelly's Avatar
    Join Date
    Aug 2015
    Location
    Caloundra West, Sunshine Coast Qld
    Posts
    6,631
    Hi Sheven,

    I finished an EX-5 about 2 months ago and it is wired up exactly the same as a Fender Jazz Bass being 2 x volume & 1 x tone. It is really quite simple and even though the humbuckers are 4 wire conductor from memory I think a couple were already joined up which were left alone leaving just the hot & ground wires to hook up.

    I googled J Bass wiring diagrams which produced plenty of results to pick from.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •