("YOINK" and the "Ping" of a lightbulb illuminating sound somewhere above the head of FrankenWashie)
So the vac draws a vacuum in the bucket, dust goes in through the white hose and the pressure drop as it exits the hose drops it out of the airstream into the waiting bucket for collection. DO you get much blow through into the vac itself?
Yes that's right. There are better designs involving a simple cyclone but this was easy enough for me. I'll take a pic of the insides soon.
Yes the vac is still quite powerful too despite the bucket. Check YouTube for some diy dust extractors.
Just cut out the neck today. I had to use my hand saw for most parts because the jigsaw kept burning the wood.
The flames here aren't as great as the top but they should look much better once a finish is applied.
I also managed to route the neck out. Curly maple chips easily and I had 2 spots on the headstock where I had chips.
I'm not sure if you can see, but the end of the neck is made for a 24 fret fingerboard with an overhang.
wow looks awesome Simon, how come you are working on necks and not at work ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Haha the reason why I'm able to build so quickly is because I'm taking some time off before I start work in September. Sadly from then on I probably won't be able to do any more and will most likely disappear from this forum!Originally Posted by wokkaboy
((
nice one Simon, the reason I ask is because I am so damn jealous you are in a man cave and I'm not !
surely you will have time to keep building after your job starts, no where near as many hours no doubt
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Murphys fourth law of Luthiery states,
No matter how many clamps one has, there will still be a need for more clamps....
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
So damn true!
that's it, there is always room for at least one more clamp !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote
