Hi Abe, yes you can bend the 3rd lug of the volume pot but be careful the lug is very thin metal and snaps very easily. I generally solder a short piece of wire on the cheaper supplied pots. You will find with better quality pots the lugs are often longer and a thicker metal and allows you to bend the lug to the pot casing much easier
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Here is a picture of the jack with 2 small pins, not sure which short pin to use. Both same size. Thanks
Posting Permissions
Reply With Quote