The steampunk theme sounds fun dedman you could use external water coolers to make it look even more original.
The new Mac Pro is a stunning piece of engineering inside.but all your extra audio device's need extra external boxes tfit them in.
The steampunk theme sounds fun dedman you could use external water coolers to make it look even more original.
The new Mac Pro is a stunning piece of engineering inside.but all your extra audio device's need extra external boxes tfit them in.
Last edited by kimball492; 28-04-2016 at 01:25 PM.
Ok so i only read up to the end of page 2 so I dont forget what Im going to say... Doc, the process takes a while as there are custom bootloaders and stuff to do, you might as well do multiple HDDs and do a DUAL BOOT system, which is extremely easy, if you can get OSX running on the Hackintosh the no doubt you could dual boot Win7,8 or 10 that you can select on boot startup.
Also Doc where is the El Cap DVD going to be installed?
EDIT: about the trash can Pro, it is so damn expensive because Apple are using WORKSTATION grade hardware, thats the entire main focus on the Pro. Doing a Hackintosh for any of the main Mac units is the same thing but just CONSUMER grade hardware. Plus you can start small at something around $1000 and go as high as the compatibility list can go!
Last edited by keloooe; 27-04-2016 at 07:56 PM.
I was thinking along the lines of having two HDDs in my Hackintosh PC, one as the System drive and the other as the Audio drive (for audio recordings), then I would install El Capitain on the System drive, of course I could do as you're suggesting and make it a Dual-Boot system, I don't know if Microsoft will let me install Windows 7 onto the Hackintosh as a dual-boot using my Genuine Windows 7 DVDs, since they were registered with my Desktop DAW PC before I made the jump to Windows 10, I'd probably have to purchase a new licensing code.
Here you go Kels you'll find this an interesting read.http://www.pro-tools-expert.com/home...for-pro-t.html
Personally I love the look of the cheese grater on the left look at all the extras you have to buy for the new one on the right
P.s Kels how'd the recording go
Last edited by kimball492; 27-04-2016 at 08:26 PM.
In ref to private messaging you Doc you have to empty your inbox before anymore can be sent.
thanks for the reminder for Doc there KB, pretty sure my inbox is full too !
I'll empty it now
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Hey Woks what's going on in the luthiers lair
Last edited by kimball492; 28-04-2016 at 01:48 PM.
haha you crack me up KB,
haven't had much energy weeknights so not much since last weekend.
have a look on 4D Guitars FB we got a door cut in #3 barrel and its hinged, sanded and stained it with wudtone Golden Rod
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
That's spooky I'm just searching for my wudtone golden rod that I bought from DB ages ago lol. It was a special blend he did for 1959 style Les Paul of Saffron and Golden Rod
Last edited by kimball492; 28-04-2016 at 03:01 PM.