Results 1 to 10 of 48

Thread: If you use a DAW these pages may be of use

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Overlord of Music kimball492's Avatar
    Join Date
    Feb 2013
    Posts
    2,079
    Cool doc how's your PC running your DAW software with the extra ram now

  2. #2
    GAStronomist DrNomis_44's Avatar
    Join Date
    Dec 2014
    Location
    Darwin,NT Australia
    Posts
    5,513
    Quote Originally Posted by kimball492 View Post
    Cool doc how's your PC running your DAW software with the extra ram now

    I haven't done any extensive testing, but my DAW PC definitely seems to be happier running my DAW software with the extra Ram now, I'm back to using my Digi002 Firewire Audio Interface, and so far I haven't experienced any system crashes, or DAW software crashes...touchwood, I'm still going to go ahead and buy a couple of PCI Firewire cards with Texas Instruments Chipsets on them though, I have noticed an improvement in performance after I removed a PCI card with some USB 2.0 ports on it, it had a VIA Chipset on it, I don't know if it was contributing to the instability issues I had been experiencing though, but you never know.


    I read somewhere that sometimes Hardware issues can manifest themselves as software issues and vice-versa.


    I'm starting to think that there may be some issues with my Focusrite Saffire Pro 40 Firewire Audio Interface because I downloaded the latest driver update from the Focurite and installed it, but even though both the Locked and FW Active Leds on the Saffire Pro 40 were lit, the driver software said that no device was connected, I'm thinking that the Firewire ports on my Saffire Pro 40 may have gone a bit flaky, or there may be something wrong with the Firewire interface circuitry in the Saffire Pro 40, it could even be a firmware issue.
    Last edited by DrNomis_44; 26-04-2016 at 04:21 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •