Yum BMB! It looks like a gold tiger!
Yum BMB! It looks like a gold tiger!
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
some awesome entries again this month, some excellent builds from first timers too
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Dedman, a sumptuous white and black Tele AND a Triumph (Thruxton?)... clearly you are trying to sway this Judge. I may have to abstain from judging this month as you have clearly already won at life.
Actually, confession time, it's been over a year since I've judged a GOTM.
Very nice effort mate, the Tele looks sensational and the bike even better.
Is the Ashtray a Wilkinson? I looked everywhere for those for our TL-51 kit and could not find anything that was reasonable priced. If you could please send me a link for that ashtray, I'll check it out for including with our kit.
Cheers,
Adam
adamboyle(at)pitbullguitars.com
Thx guys for the comments.....and good luck to all the participants this month.....
Adam,
do you do a gold Back plate for the neck?
excellent entries again this month, I'm still getting over judging 12 entries last month !
Bluesmartyboy don't think the gold neck plate is sold separately, comes in a ST-1 and TL gold hardware upgrade and on FV-1 kits.
I suggest you have a look on ebay or the Realparts online store
here it is
http://www.realparts.com.au/hardware...late-gold.html
don't forget you will need to order the 4 gold screws as well
Last edited by wokkaboy; 25-04-2016 at 10:13 AM.
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Ah what the hell, here's my JBA-4 kit finished, Ash body and all stock except for the Entwistle pups (which sound great BTW). Rubbed in black stamp pad ink a half dozen times then 5 coats of clear gloss over the top to let the ash grain come through, Dingo wax for the fretboard. It's my second build and certainly won't be the last.
EX-1 finally done.
Been a long time getting this one finished and below I have listed all the mods and upgrades:
5 Coats Dingo Tone Coolangatta Gold Base Stain
5 Coast Dingo Tone Coolangatta Intensifier Coat
20 + (maybe even more) coats of Tru Oil
Dingobass Bone Nut and Neck Setup - best investment anyone can make. Awesome job and many thanks DB.
2 x Bourns 500k Audio Taper Push Pull Pots - one used to split neck PUP to slugs and the other to split bridge PUP to screws
Set of Tonerider Alnico IV Classic Vintage Voiced Humbuckers
1 x Sprague 0.022 Orange Drop Tone Capacitor
1 x Fidelity resistor & capacitor volume control upgrade
1 x Gotoh 3 position switch
1 set of Grover Locking Tuners
1 x Rosewood Truss Rod Cover
Dingo Tone Wax used on Rosewood Fret Board & Truss Rod Cover
Cat music Conductive Shielding Paint
Epiphone genuine Explorer Hard Case
Only standard parts used were the Bridge, Tail Stop, Strap Buttons & end jack plate and 1/4" socket as too hard finding a black retaining nut for a switchcraft one as threads differ.
http://www.buildyourownguitar.com.au...164#post105164
Last edited by wazkelly; 25-04-2016 at 07:13 PM. Reason: Add build thread
That is a wicked black there GenX Dave. And I'm quite fond of Waz's stripped back EX.
Lots of entries this month and still 5 days to go.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck