So, I'm still not clear on this..... for my TL-1 I've shielded all cavities including the control cavity. From what Wokka said, it sounds like I need to make sure that my ground wires don't touch the shielding or it may ground the circuit and cut the output, but WeirdBits mentions that the cavity shielding needs to be connected to ground at some point. Are they not all grounding to the same thing? Do I need to run a ground wire from the shielding on each of the cavities to ..... somewhere? Also, do I need to run a ground wire from the bridge (soldered to it, or just touching it when bridge screwed down) over to the back of one of the pots or could I just solder it to the ground wire on the bridge pup?
So many questions, so little understanding