I've not seen a JM-1 in the flesh but found this thread with a pic of the bridge and it seems that is normal
http://www.buildyourownguitar.com.au...ghlight=Jaguar
I've not seen a JM-1 in the flesh but found this thread with a pic of the bridge and it seems that is normal
http://www.buildyourownguitar.com.au...ghlight=Jaguar
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Alright it's all sorted thank you guys will post a picture when it's painted
Hey Sean, are you painting the body/neck or is someone else doing it ?
it should take a few weeks for the paint to fully cure assuming it will have a clear coat over the blue
the longer you wait the better chance of the paint being cured so you can cut and polish it.
don't rush the build for the sake of plugging it into an amp !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Dad's a spray painter by trade.
i wouldn't trust myself with a brush
First off ignore the plastic bag in the back.
any way the guitar body is finally painted took longer then i expected but hey it's done and looks good so i'm not going to complain. the color of the guitar is a "Volkswagen Blue"
The neck of the guitar has a clear lacquer over it which may cause a bit of grip i'm unsure.
My next move is to do the soldering (unless suggested otherwise)
i have put car polish over it to make it shine more. also unsure whether to of gone a darker blue? but it looks pretty fine ether way.
Regards
Sean
I like that colour, it's lookin good! I'd probably track down a white pick guard but that's just my taste
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Nice colour choice, can't wait to see the guitar all finished.
Love the blue. She's going to look really nice all assembled!
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Dads done a grand painting job of the guitar Gibson.Fender Now you've Gotta show your dad what you can do and impress him.
Good luck
Nice colour there Sean!
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck