Disaster!!! I was pretty pleased with the result after about 6 coats of tru oil so i decided to try some ghs guitargloss as a finishing touch. It was like all the tru oily guuuuudness and some of the paint just came right off!!!
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Looks like that GHS stuff partially dissolved the TO plus part of the colour from the underlying artwork.Originally Posted by Joe Piler
Disaster!!! I was pretty pleased with the result after about 6 coats of tru oil so i decided to try some ghs guitargloss as a finishing touch. It was like all the tru oily guuuuudness and some of the paint just came right off!!!
Verstuurd vanaf mijn D6603 met Tapatalk
Never had that happen as I mostly lay down 6-8 coats then 2000 grit or higher wet sand after it has been left to cure for a couple of days. Then repeat again but with micro mesh pads from 4000, 6000 to 8000. For the 3rd application of coats from # 12 or higher usually leave a bit longer, week or so and then wet sand again with micro mesh pads right up to 12000. Next step is to use Meguiar's Car Polish as per these links.....http://www.meguiars.com.au/surface-p...mate-compound/
http://www.meguiarsdirect.com/category/clean-prep
Posting Permissions
Reply With Quote