Originally Posted by wokkaboy
My younger brother's a Scorpio, his birthdate is on the 18th of November, but he was born in the 70's about 5 years after me.
And we finally get to page 70.....lol.
My younger brother's a Scorpio, his birthdate is on the 18th of November, but he was born in the 70's about 5 years after me.
And we finally get to page 70.....lol.
page 70 Doc, only 30 to go hahah piece of cake mate.
So back on the build, whats happening you waiting for the last final coats to cure ? I'd be patient and let it cure for a couple of weeks if you can.
Look into a headstock logo because I will never give the highest GOTM score to an axe with no headstock logo !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yep, I'm waiting for the final coasts to cure, we've been getting a bit of rain lately so the drying time will probably be pretty long, not to worry, thanks for the reminder, I'll need to buy what I need to print-out the decal, ink cartridges for my printer and the decal paper, I'll buy them next week.
I have already found some stuff I can use in my decal design.
I reckon I can do another 30 pages easy mate, well I've gotten this far so how hard can 30 pages be?
Last edited by DrNomis_44; 08-04-2016 at 10:41 AM.
yeah Doc you seem to attract thread jackers mate ! LOL
if you wait for curing at least the final coat will be nice and hard and ready for a good polish. See if any local art shops supply the decal paper or a large stationary shop like Officeworks, I've never tried them. Otherwise fleabay but you will have to wait for postage times
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Officeworks is going to be the first shop I try for Decal paper, I know where there's an Officeworks shop in Darwin, it's along the Bus route into Darwin CBD, shopped there before so I know where it is, might even buy a couple of new Optical mice for my PC and Laptop while I'm at it, they may even stock the ink cartridges for my printer too.
With regards to the thread-jackers, all I can say is, serves myself right.....lol....j/k.
Last edited by DrNomis_44; 08-04-2016 at 10:52 AM.
They won't have it. Hobby stores that sell model kits and remote control gear will be your best bet to buy over the counter. I've always got mine on ebay.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
I think I know some shops in Darwin that sell Hobby supplies so I'll give them a try, I think there's one in the shopping centre in Casuarina, anyway, I guess it won't hurt to do some shopping around, I'll give eBay a try too, cheers pablopepper.
Are you in Casuarina Doc? last time i was there i had a D9 Cat and was destroying the houses Tracy didnt flatten..
I was living in Casuarina up until around 2007 or so, had to do quite a few moves to a new place to live since then while I had to wait 2 years and 6 months to move into the flat I'm currently living in now, it was real stressful waiting for that long.
At one place I stayed, I was driven to what I thought was a nervous breakdown by the family I stayed with, having domestic disputes and their second-eldest daughter being a real pain to me, I won't go into what she did, suffice to say I was very extremely annoyed by what she did, she drove me royally up the wall so to speak, so I ended up having to move out to save my sanity.
Last edited by DrNomis_44; 08-04-2016 at 11:37 AM.
Just starting to wonder if there's a guitar attached to this build diary?
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956
Posting Permissions
Reply With Quote