looking unreal the mock build Doc and you will be hitting page 60 very soon with your single replies to everyone haha
EDIT PAGE 60 DOC !!!!
looking unreal the mock build Doc and you will be hitting page 60 very soon with your single replies to everyone haha
EDIT PAGE 60 DOC !!!!
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Originally Posted by wokkaboy
Woohoo!!!!
Now, I only need another 40 pages to get to 100....lol.
don't laugh Doc I think this thread has legs to reach 100 pages
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Agree. We still have electronics, fret job, set up and sound demo to go!
Sent from my GT-I9506 using Tapatalk
Current Projects
#Planning 5 String Bass
Ah, and cats. I'm sure I've seen them somewhere else in the forum!
Sent from my GT-I9506 using Tapatalk
Current Projects
#Planning 5 String Bass
On page 60... go Doc!
So at this point here's what I'm going to do, I'm going to wait till this coming Sunday then I'll dismantle the Strat so I can apply the last coat of DT CG Final Coat to the body after giving it a very light sand with some 400 Grit Sandpaper, while the body is drying I'm going to then start work on doing the final wiring-up of the Scratch Plate, and while I'm doing that I'll get some pics done so that I can do the write-up for the Soldering mini-tutorial, so stay tuned.
400 grit??? Sounds a little extreme for a final sanding Doc...
Did you end up buying the copper snail tape?
Last edited by Muzza; 01-04-2016 at 07:59 PM.
first build PRS-1TS in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4937
second build PRS-1Q in progress...
http://www.buildyourownguitar.com.au...ead.php?t=4956
go 800 or even 1000 grit Doc
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Nah, I didn't end up buying any snail copper tape the last time I was at Bunnings, but I might see if I can get some tomorrow, I think I had some 1200 grit sandpaper floating around, but I might see if I can buy a couple of sheets tomorrow, or maybe a couple of sheets of 1800 grit.
Posting Permissions
Reply With Quote