Im using wire to ground the pots because the lugs are too small to bend onto the pot. Whoch is a huge pain in my behind atm!
Verstuurd vanaf mijn D6603 met Tapatalk
Im using wire to ground the pots because the lugs are too small to bend onto the pot. Whoch is a huge pain in my behind atm!
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Got her finished and rougly set up, the nut slots need to be filed down i wonder if i can do that myself?
Electronics work great and the pickups sound like nothing ive ever had before. I'm surprised by the quality of the stock pots and tuners, the selector switch feels low end and the fastening nut thread doesnt fit very well.
I will tale the time to make better pictures and record a sample.
Verstuurd vanaf mijn D6603 met Tapatalk
Last edited by Joe Piler; 06-05-2016 at 05:47 AM.
Builds:
WIP: LP-1S "Poison Ivy"
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Bravo!
Build 19 PSH-1 Kustom
Build 18 HB-4S Kustom
Build 17 WL-1 Kustom
Build 16 TL-1TB Kustom
Build 15 PBG-2-
Build 14 FTD-1
Build 13 RD-1 Kustom
Build 12 DM-1S
Build 11 MKA-2 -
Build 10 Basic strat
Build 9 JM Kustom
Build 8 FV-1G
Build 7 ES-2V
Build 6- Community prototype
Build 5 LP-1LQ
Build 4 ES-5V
Build 3 JR-1
Build 2 GD-1
Build 1 TLA-1
Haha tyOriginally Posted by Dedman
Bravo!
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Such a cool looking guitar Joe. The handpainting has almost inspired me to get out the brushes! (its been about 3 years since I last painted anything). The maple neck really suits the build too. so cool. I understand what you say about 10's rather than 9's, but the Ernie Ball 9's are quite good. That being said I just snapped my high E
Build #1 - ST-1 - Completed
Build #2 - LP-1SS - Completed
Build #3 - TLA-1R - Completed
Build #4 - SGD-612 - Completed
Build #5 - ES-1G - Completed
Build #6 - STA-1HT | Completed
Build #7 - ST1JR - Completed
Current Build #8 - JBA-4
Build #9 - Semi-scratch build Tele x 2 - Completed
Current Build #10 - PRS-1H
Current Build #11 - AGJR-1 - Completed
Current Build #12 - ATL-1SB
Current Build #13 - GST-1
Current Build #14 - FBM-1
Thank youSuch a cool looking guitar Joe. The handpainting has almost inspired me to get out the brushes! (its been about 3 years since I last painted anything). The maple neck really suits the build too. so cool. I understand what you say about 10's rather than 9's, but the Ernie Ball 9's are quite good. That being said I just snapped my high Ei will try to get some daylight pics this weekend. There's nothing wrong with the quality of the stock string i just like a thicker gauge on a les paul.
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Nice! The maple board really pops with the green and gold. Love it!
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Ty ty
Verstuurd vanaf mijn D6603 met Tapatalk
Builds:
WIP: LP-1S "Poison Ivy"
Look damn fine dude! Well done!!
Posting Permissions
Reply With Quote
