Is there any issue with scraping down the edge of the binding? Right now it got quite a sharp 90 degree edge to it. I'd like to just shave a smoother edge with a razor blade or exacto knife so it doesn't scrape your skin like it does now. Here's a photo that hopefully shows what I mean.
The last thing I noticed is that the wood in the bottom of the neck cavity appears to have the fibres torn out - it almost looks like punky wood, but it isn't - the fibres are just torn. Will this cause any strength issues when I glue the neck in?
Still lots of time before I get to working on this one full time, but it's nice to have another kit I can tackle while waiting for the finish on the previous one to dry (not impatient at all).
Reply With Quote