Dedman's first build TLA-1

[Dedman]

Just for fun I did a little sanding today .. The neck and body are now silky smooth, any smoother and the top coats won't stick! So I'm going to leave the primer to harden up for a few days. Over Easter I'll wire up the switch panel with my new pots and switch and do a test assemble, mark the bridge, tuner and pick guard screw holes and drill them. I was going to do that earlier but was waiting on some 1/4 to 10mm tuner adaptors and they arrived today along with my cloth covered wire. The pick guard is going to need some adjusting as its a 3 ply RealParts one and the Chinese switch panel is a bit over sized. Any tips on "adjusting" pick guards will be appreciated ;D

[Andy40]

Just for fun I did a little sanding today .. The neck and body are now silky smooth, any smoother and the top coats won't stick! So I'm going to leave the primer to harden up for a few days. Over Easter I'll wire up the switch panel with my new pots and switch and do a test assemble, mark the bridge, tuner and pick guard screw holes and drill them. I was going to do that earlier but was waiting on some 1/4 to 10mm tuner adaptors and they arrived today along with my cloth covered wire. The pick guard is going to need some adjusting as its a 3 ply RealParts one and the Chinese switch panel is a bit over sized. Any tips on "adjusting" pick guards will be appreciated ;D

Nice work!

sometimes you need a bit of something to hold the 10mm adaptors in place. did you get vintage tuners?

My 3 ply pickguard turned up today as well. I too need to modify. looks like i'll need to replug some of the holes as well. I've used the dremel to reshape a pickguard before and it wasn't a hassle.

Good luck with yours mate.