I suppose being labelled a Collingwood supporter is probably just slightly worse perhaps as aren't they the team of choice for most Victorian Bogans whose only way of measuring their IQ is by counting the number of teeth in their head?Originally Posted by dingobass
Just like you being a closet Carlton supporter, eh Woks?
Haha good one DB and Waz. I told DB my team before 1987 was Carlton
Would have been VFL back then. Then a West Australian team formed so I was a west coast fan 1987 then 1995 the best team Dockers formed!
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Watch it Wazza.... The cupboard under the stairs is getting a bit crowded....
Not to mention the power I wield to mess with your avatar
There is always a workaround for glitches, mistakes and other Guitar building gremlins.....
bwhahha Wazza you have a pretty stern warning from DB there.
No beer is served in the naughty cupboard either and you have to share with Pest hahah
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Carlton. Collingwood. Dockers. That's some form of football isn't it?!
Haven't heard from Pest in a long while. Hope he hasn't dropped off into a deep coma in the naughty cupboard.
Accidently noticed I might have uncovered the true meaning of that famous Carlton Beer VB = Victorian Bogans haha.
got a bit more done over the weekend on the bush chook axe. DB kindly gave me a neck for the build. It is a pre-shaped tele neck so I had to sand the neck heel to make it fit the pocket. The neck and bridge screw holes were pre-drilled so I did a mock build to make sure the string alignment was good. No problem
Got some labels on the headstock and a few more on the pickguard and pup covers.
Drilled the neck screw bush holes. Here's how its looking. Got a few more labels to put on but it's getting there
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
couple more pics before I disassembled it and got a clear coat on the pickguard and pup covers
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Geez mate you had to drink some shockin' beer to get that one together, dont think my guts would of handled it
haha Tony, luckily most of those beer labels Chippo drank, I had about 3 exports and a king brown of Swan Draught
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote
