Results 1 to 10 of 71

Thread: Brett's First Build - IB-6S

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #20
    It lines up perfectly with the truss rod so I would say it is definitely that. It's on the side with 3 holes, but I just took off the end of the screw with some tin snips and that did the trick! It's deep enough to get some grip but a few mm shy of the truss rod. Hopefully that won't cause too many issues down the road. Still one screw short though!

    Edit: No other problems regarding the truss rod placement and screw holes, just the one
    Last edited by Mechanixxxer; 22-10-2015 at 08:20 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •