Yeah the springs will cover fair bit of the logo so don't make the logo a priority, I put 2 x 4Dlogos on the clear strat cover axe and springs cover a fair bit unless the sprngs are in the centre 3 lugs and put teh logo on the outside or in the gap if 2 are outside lugs are used
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
