Wokka, on the top E string, the measurement from the inside edge of nut to crown of 12th fret is 323, and from the 12th fret to center of bridge cylinder is 324, although I may get another turn out of the screw ( that one is shorter than the others, is that normal?). With the lower E string I have tons of adjustment either way to achieve the measurement, what should that be?
On my body there is a hole drilled from the neck pickup to the neck pocket.What is this one for? Is it still necessary to run a earth wire to the bridge, even though the pickup, is already earthed to the control panel and then screwed to bridge?
Jeff