After a few coats of Tru-oil and being left over night, I've finally attached the decals
I did put copper tape in the pickup cavities as well, with copper strips feeding between the gaps to get continuity into the control cavity.
I've given it a light rub with some 400 grit as a few rough spots were coming up.
Time to leave it alone for 24 hours before I start throwing a stack more coats over it and start to build up over those decals. They're covered in polyurethane, so that should be.. interesting..
The new bridge I ordered a week ago, is still in Perth according to Australia Post. Glad I'm not in a hurry..
In the mean time, there's ribs in the smoker for lunch and I've got the whole bottom section of the 3D Plasticaster printed, so there are things to do..
Reply With Quote