Hi all. This is actually a finished project but I thought I'd share some of the process experienced along the way. I have done quote a few rebuilds and mods along the way but am by no means an expert/luthier.

So, the kit arrived, was inspected and put together. As the top was quilted I wanted to get the bridge centered with the join of the veneer. This meant slightly sanding the neck and putting a shim in the pocket to ensure everything lined up. A quick check on the bridge location meant cutting a bit out of the body for the bridge pickup. Other than that the geometry of the guitar seemed fine.

Well I am trying to upload some pics but ms photos will only resize to something that won't fit. Anybody any ideas how to get photos from my pc (which came from my phone) resized to fit?

Any help greatly appreciated.

To be continued...