Results 1 to 3 of 3

Thread: Sanding off sealer/resin to expose wood for staining

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 27-05-2020, 11:16 AM #1
    quyet
    quyet is offline
    Member
    Join Date
    May 2020
    Posts
    1

    Sanding off sealer/resin to expose wood for staining

    Hello from Kiwiland. I figured this forum may be an appropriate place to ask...

    I have a parts-jaguar that I am refinishing. I stripped the poly and sanded off a white coat (primer?) to find a dull coat of what I assume to be sealer resin. I can see some areas exposing the raw wood with nice colours, but when I try to sand any other area, I make little progress. I have been using 120 grit paper. Thinking of dropping it to 60 or 80. Any advice?
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: IMG20200527145900.jpg  Views: 168  Size: 102.9 KB  ID: 35306  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules