I just hope my skills are up to it!
The cavity is small, but i do have the ability to widen it where required so that can be done.
Was also just thinking, i may only need to do 1 of the holes! I've included a pic that shows what i mean. I am having 2 pots and a selector switch, so....thinking that as per the pic i could live with one of the buttons as the gap on a straight drill hole isn't much (you can see that a folded piece of paper is already too high so i reckon i could leave this (or even sand the hole to one side by 1mm if required.
The second button definitely needs to be fixed with the above option, but the third hole probably doesn't matter as much as its the selector switch so just needs to look on on the top.
I probably need to use the dremel to widen the cavity a little so i can even out as per your pic FrankenWashie.
I think i'll start on finishing the neck and getting the decal on etc while i carefully plan for the body!!!
Reply With Quote