Quote Originally Posted by McCreed View Post
Mate, that is effing stunning! Nice job!

I have a few questions for you:

What glue did you use under the fabric?
What is the clear resin you used, and how did you apply it?
And, how did you end up finishing off the fabric edge? It looks seamless as far as I can tell!
It is normal PVA glue, but make sure it was spread in a very thin layer, as it will soak through if is too thick. The resin I used is call Kraft Kote. At the end of day you could use most self-levelling resin with low viscosity and long setting time. Clear resin for River Table Top, or resin used to seal photo/ canvas are ideal for this process. (Don't use anything resin you got from hardware store, they are lightly to be old.)

As for the edge, go have a look at post #17, there is a indentation on the edge, hence when apply resin you could sand it back to level the edge. If i have redo this project again, i will start building the edge with resin first, once is think enough, do the flood coat.