Quote Originally Posted by RocknRolf View Post

Some questions:
1. I have found a position that is feels good for the bridge but I want to double check here.
From the inside of the nut I use 25 1/5 inch for the Low E and 25 5/8 inch for the high E. is this correct?
2. While test fitting the controls, I found that a capacitor is in the way of placing the controls level to the bridge. I can turn the whole unit around and have a perfect fit though. Can I bend the capacitor to will it into place?

Thanks guys!
The scale length for a TL should be 25.5". Some people aim to have that scale length when the saddles are at their half way point, others aim for anywhere up to 3/4 of the way out. I'm sure other people may chime in on their preference. From memory I aimed for closer to 3/4 to give myself plenty of room for intonation adjustment.

In regards to the control panel. There is nothing wrong with having it flipped around, that's a personal preference thing. And yes you can bend the cap towards the plate to give yourself some more clearance.

I'd also second the Katana. They sound great, loads of features and I was very close to buying one when I got my SG but ended up splurging a bit and getting a Marshall DSL just because I was able to get a great deal.

Given my poor luck with finishes, I'll allow someone else to answer your question regarding finishing process.