Mate I am not a trades person.....but have been doing lots of research reading and you tube watching on veneers.Originally Posted by Andy40
I had to go hunting for this diary!
Got my Wilkinson bridge and dowelled up the headstock holes for redrilling to fit the grovers
Sent from my Pixel 3 using Tapatalk
Wetting....or steaming your veneer prior to bending is essential to avoid tearing in the wood fibres. E.g. damping you veneer down.....pressing into shape against the headstock....use a round dowel and clamp to hold the shape.....allow to dry in situ.
Remove clamps.....apply glue and attach...clamp again....then trim to size and shape.
I don’t mean anything...just trying help.
Reply With Quote