Day 6: Part 4
Finally binding everything!
I used too much masking tape for the top, using thin super glue, some areas were still tacky after being glued 20mins prior. I'd basically mummified the binding, not allowing it to breathe!!
Tackling the cutaway was tricky!
End wedge should look good once cleaned up. Looking from this angle, the perspective is all wrong. There is not a major angle between the top and the bottom.
Before scraping
After scraping. I still have a lot of scraping to do on Monday, but I should be into the neck sometime that day.
Sent from my SM-G930F using Tapatalk
Reply With Quote