Day 3: Part 1
Rosette day! Again, this is also slightly different from my original plans, but that's the beauty of this process. Having said that, this was an idea I had in my stockpile, and Aaron was more than happy to run with it, as it hasn't been done before in his class.
Glued two pieces of blackwood together.
Using a dremel, I routed a shallow channel and inlayed some blackwhite/black purfling using black dyed super glue.
Scraped this flat then cut out the remainder of the rosette, placing it on the sound board to check it out
Routed out the channel for the rosette then enlarged it ever so slightly to insert more b/w/b purfling as a final border
This is a dry run first.
Sent from my SM-G930F using Tapatalk
Reply With Quote