The kit looks pretty good. Clean Binding, frets look well set. Drill holes in correct places.
I'm waiting on a replacement post for the bridge, which didn't fit.
The neck fits nicely, but the tail on the neck doesn't go through all the way. Don't know if that's normal.
Looks like some tear out on the fingerboard at 12th fret.
The hole from the switch to the pickup hasn't gone all the way through - wondered about how to drill that hole out anyway so good practice.
Most annoying, the top veneer doesn't seem to be centered, so the whole point of the veneer is lost! I've been considering carving the cutaway like a PRS and putting bevels in so maybe that decision has been made, but it seems a shame to have to remove all of the veneer.
Reply With Quote