Nearly done with my explorer kit.
Just need to think of what to put on the headstock, put the truss rod cover on, as well as fix the noise issue.

Wired it all up as the seymour duncan wiring guide suggested (has a liberator vol knob), but it had immense noise with the 2conductor pickups, so did some ground stuff, and it fixed most of it, but there's still a bit of noise. Will probably connect another ground, and see if that helps (noise mostly goes away when I touch the pots/ lead)

Aside from that, it's new pickups, and we're done.
Got it all set up, and it plays great. Frets are slightly off apparently, but not enough to be a major issue. Has as much fret buzz as my ibanez, so that should be fine, hah (apparently mostly because of the .64 gauge b)
Gotta say too, I got some grover tuners put in, and they are awesome. Well worth the money.

Either way, really happy with how it plays so far. Just need to do a few small things, and it'll be g

Strings I went with are ny xl 11-64 (11-49 with a 64 b)