Hi all,

Starting off my first kit with a GPR-1M.

I wanted something with a classic look but double humbucker and it looked like the wiring wasn't going to be too complex!

Have unboxed the kit and done a virtual build, all parts accounted for and away we go!

First two questions to the group please:

1) I want to be sure before I start about the electrics... The GPR has two volume and two tone pots, a three way switch as well as two smaller coil splitting on/off switches.
My question is: are the 5 pre-drilled spaces for the pots and the three way switch? And, if so, where are the coil splitters going to go?

2) I am assuming I will need to drill some holes for the bridge as there are none supplied. Is there a guide for this?


Just wanted to get that out of the way as, if I need to drill more holes I would like to do it before sanding and staining.

Thank you in advance for your help,

Hesh