Quote Originally Posted by Adam Barnes View Post
Thanks its definitely not deliberate, this was my first kit and ive learned a bit more about guitars since it was built thanks to this forum. Its
been over 6 months since this one was finished and the clear coats had never set it was still tacky and soft to the point were hairs from my fore arm where sticking to the guitar. So while i was finishing the grs i decided to sand it back and re clear coat, it diddent really sand of but rubbed of in little balls
Wow sounds like a fault with the clear. Ive had that happen with a faulty batch. Was doing a tabletop that didnt dry hard. Had to scrape it all back to bare. Chemical driers are added into the paint at the factory, if they are faulty then they dont react with the clear and never cure properly. This can also happen if it reacts with undercoats or basecoats. Bummer mate. Better to start again sadly.