What colour wires to use to get out of phase sound

[Joe3334]

My bridge humbucker has 5 wires.
Individual black wire (5-way switch)
Green and bare soldered together (volume pot)
Red and white wires soldered together (connected to the first DPDT switch?????)


Now for my middle position hot rails (single coil sized humbucker) which has 4 wires
Individual black wire (5-way switch)
Individual white wire (volume pot?????)
Red and green wires soldered together (connected to the second DPDT switch?????)

Are the red and white wires on my humbucker and the green and red wires on my hot rails pickup the correct wires to use when wiring to two individual DPDT switches that will activate the out of phase sound?