No one?

Perhaps I'm not making myself clear enough. So again what I did; I followed the video tuts from PBG and there was no mention of different kinds of pots. So I just put in the four pots into the cardboard (as suggested by the video) and started following the steps of soldering.

But when done I tested it all and it appeared that only the bridge volume pot and the neck tone pot are working as expected. The bridge tone pot and the neck volume pot however are not working as expected. The bridge tone pot does nothing (turning the knob clockwise or counter clockwise) and the neck volume pot works as follows (when turning from zero to ten): full volume at zero, silence at five and full volume at ten.

When checking the soldering I noticed nothing wrong so I was very confused.

Later, I read some topics (and I really hate it that I don't know anymore who build is was) that someone had two pots labelled 'a' and two pots labbeled 'b'. The 'a' pots are for volume (as said) and the 'b' pots should be the tone pots.

Now I'm just wondering; could I have had the same pairs of pots and accidentally mixed up two pots?

Or, stated otherwise: does the LP kits comes with four identical pots?