Whilst the body and necks move forward with the finishing that I keep making ungood. (Sad Face insert here....)
I dug out my bits and using the cardboard divider from a 30 pack of Pepsi Max...recycling....I made a template for the pots, jack, switches for this little girl.
Using this wiring diagram.....thank you again Weirdy....
I began make runs of black for earth and white for active with vintage push back wire. I got the pots soldered up with caps in place.
Then I looked at the switches....the three position switch is no hassle....easy....and yes I only pushed the wires into it as the switch is not in the control cavity.
Now this big number....the SPECIAL $60 switch is a challenge. Weirdy, or anybody got any ideas how I attack this behemoth? Am I missing something....as the bits poking out look like sockets or joiners of some description...is there some way to attach wires to this in a different manner I am missing? The white vintage wire is to give you an idea how small these sockets/pins are....amazing...and like WOW man.
All advice muchly and happily received. Thank You.
Reply With Quote