Ladies and Lads of Luthery,

I shall be venturing to Aldi tomorrow to get this.....

https://www.aldi.com.au/en/special-b...-multimeter-1/

Not a bad price for a multi meter with temperature probe.

I don't know if this would be much use.....but I have been considering putting a spray setup together....even just for clear coat finishes.

https://www.aldi.com.au/en/special-b...rush-kit-150w/

Anybody with experience with spray work got any ideas. It is $99.99, comes with a moisture trap and filter, adjustable regulator 20 to 23 litres per minute.....5cc cup and 20cc pot. Max pressure of 4 bar, whatever that is in PSI.

I don't have the use for a big setup nor the justification for about $300 from super cheap or the BGS.

Tempted.