Well, my old 1950s Commodore lap steel has been a little recalcitrant lately so it has earned a spot on the bench...
Interesting... it's a cast aluminium body with red celluloid glued onto it.
.. with a wooden base and wood behind the "headstock", secured by pins that have been bent at 90⁰ and hammered home!
You see here the huge, steel tailpiece with some of the chrome plated tinware used as decoration.
The pickup from above. Fully handmade by a Taihape panelbeater called Bunny Milne. The pole pieces go through the coil and screw into the body through a sole plate which is insulated...
The pickup exploded. It wouldn't surprise me at all if Bunny had wound his own pickups, eh! Chunky coil, with an impedance of 7.4kΩ...
Reply With Quote