I found a tide mark across the back of the body.....think I will let her hang for two or three days...then some sanding...colour and polyurethane again.
Otherwise the mix of U-Beaut stain Blue and then a wipe of Black over the top in places is going well. I actually like it a lot. The Blue was very bright...and the black has made the colour dance around in the grain in places.
The headstocks were given two coats of Tru Oil...left to dry and now the necks, except the fingerboards, have had two thin coats of wipe on polyurethane. The body has had two thin coats of poly as well. (Oh the headstocks are U Beaut Yellow stained under the Tru Oil.)
I was going to mount, drill, situate things before I finished the sealing...as I did in the past. But there is just so much space to cover, so many things to do with this build. I have decided to finish the body....apply the blue 3M tape where it needs to be....measure...drill...and remove the tape.
Reply With Quote