I would like to see (if this is possible without harming the guitar's tone) a cut-out / routing in the rear of semi hollow guitars, such as the LP style ES-2v , for the installation of the controls. I know most have to work the pots and other controls thru the "F" holes, which is sometime difficult. Although there are plenty of YouTube vids on how to make this more manageable. This can brake off leads and solder joints causing you to pull the whole thing out, make repairs and then start over again. I purchased a Warmoth Custom Moon Caster and one of the joys of this guitar is the route-out for the control pocket in the rear. This makes building so much more enjoyable and stress free. Perhaps PitBull could offer this as a option!
Reply With Quote