thanks Wokka / Weirdbits
1. hum stops when I touch strings
2. it changes slightly in different pickup positions
3. in the middle position the bridge volume acts as a master volume
the wiring is so tight I cannot get a decent shot of it all without disconnecting wires and slipping the whole thing out.
Q. I have used the thin drilled holes to route the wires which has made it a lot tighter.
Do you think if I cut the body over the drilled hole passages (turning them into little trenches) it would make it easier to remove/replace/rewire and not affect anything else?
I feel that it should be ok...your thoughts?
spaghetti pictures:
I am now tired and confused and I think I'll call it a night.....
Reply With Quote
