Anyway. All put together and wired up, had a play and sounds pretty good, was very happy. I thought I would let it sit for a day or so, and then start tweaking the intonation.
Got the nut and neck not bad using the methods on here (neck is a little tricky... seems a fraction high, but nothing too bad).
When I went to intonate.... no go. Can't get it right.
Measured up, and the bridge is slightly out. I measured as per instructions on here - and it seemed pretty good ( I think it says it should be within 3 mm).
Now, with the neck glued in - it's out. I'll let the pictures do the talking....
Reply With Quote